Product introduction

The static flow balancing valve is used in the hydraulic system 3 which precisely balances the flow of each branch or every other end of the system.
The balance of the waterway system is the prerequisite for ensuring that the system operates correctly according to the design conditions. Only under this premise can the system provide maximum thermal comfort and minimize energy consumption.
The threaded connection type balance valve body uses a Venturi flowmeter inside, which makes the flow adjustment more precise and flow monitoring easier.

Working principle and product advantages

The flow balance valve is used to regulate the flow of media through the interior of its body. By rotating the adjustment valve handle, the valve stem of the balance valve moves up and down, adjusting the flow path and changing the flow curve characteristics. The pressure detection port on the balance valve body is used to measure the pressure difference, and the flow rate can be detected and adjusted according to the pressure difference.
The main advantages of a flow-balanced system are as follows:
1. The end of the system works normally under heating, cooling and dehumidification conditions, without wasting energy and ensuring comfort.
2. The pump works in the best efficiency area to reduce overheating and loss.
3. Avoid noise and pipe corrosion caused by excessive system flow rate.
4. Ensure that the temperature control valve operates within its normal differential pressure range.

Adjustment handle

The adjustment handle is ergonomically designed to ensure maximum operator comfort and adjustment accuracy.
• The adjustment handle has 5 full stroke revolutions to ensure an accurate balance of the water system.
• The micrometer display is intuitive and clear, which facilitates the fine adjustment of the flow.
• The handle is a reinforced polymer with high toughness and corrosion resistance.

Adjust the scale display:
Rotating the handle 360° is an adjustment scale that adjusts the scale from 0 (full off) to 5 (full on). The micrometer scale on the handle is decimal, which allows finer adjustment of the flow rate at the same adjustment scale.